HELPFUL HANGING TIPS

Check out the videos below for some helpful hanging tips for all Six Finger Studios products. 

KEYHOLE MOUNTING  Follow the steps below for help with keyhole mounted products including Chonko Key Racks, Entryway Mail and Key Organizers and Single Coat Hooks.

STEP 1

Take two push pins and insert into each keyhole mount with the point facing outward.  Then slide them to the top and tape firmly into place.

STEP 2

Press rack against wall at desired location so that the pins puncture the wall.  This will mark you holes for the drywall anchors provided.  Then drill the marked holes with a drill bit to match the diameter of the anchors.  (Note:  If you don't have a drill, you can use the screws provided.  Simply screw in the screws at the marked holes to create a larger hole for the anchors.)  Lightly tap in the anchors with a hammer and screw in the screws provided.  Leave the screws slightly away from the wall to allow room for the keyhole mounting to grab the screw head.  You may need to play with this to get a snug fit.  

STEP 3

Line up keyholes on rack with screws, push rack over screw heads and slide down into place.  Be sure rack is held snug up against the wall.  You may have to adjust depth of screws to ensure a tight fit.

 

MOUNTAIN HANGING  Follow the steps below for help with hanging mountain shelves and organizers including Mountain Key Rack and Entryway Organizer, Snowy Peaks Mountain Key Racks, Large Mountain Shelves.

Place the mountain at the desired location on the wall.  Mark two holes in the hanging brackets under the peaks.  Set aside mountain and drill the marked holes with a drill bit to match the diameter of the anchors.  (Note:  If you don't have a drill, you can use the screws provided.  Simply screw in the screws at the marked holes to create a larger hole for the anchors.)  Lightly tap in the anchors with a hammer.  Place mountain back on the wall and screw in provided screws into the brackets to secure the mountain to the wall.